Electronics Assembly Worker

You insert components into the board in the order given on the station card, seat the connectors, and pass the board to the test fixture. On the final assembly bench you fit the housing, route the loom along the clips and torque the screws with a controlled driver that logs each fastening. Boards that fail the test are labelled and set aside for the repair bench, never reworked at the line. Two shifts alternate weekly, 06:00-14:00 and 14:00-22:00, with a fifteen minute break twice per shift.

Finished primary school, no trade certificate needed

Steady fine motor control and good near vision

Able to follow a station card step by step without shortcuts

Willing to alternate morning and afternoon shifts

Careful with electrostatic discharge rules at the bench

Basic English for the station cards and the test messages

Net salary from 819 up to 900 EUR per month

Permanent contract after a three month trial

Afternoon shift supplement paid on top of the base wage

Cafeteria benefit on a SZEP card, credited monthly

Hot meal in the plant canteen on every shift

Company bus from Debrecen centre and from Hajduszoboszlo

Work clothing, antistatic shoes, wrist strap and gloves provided

Assemblers who pass the soldering test move to the repair bench, and from there to the test operator seat. The plant pays for the IPC soldering course and holds it on site.

A bright, air conditioned hall with seated benches, task lighting and antistatic mats. Antistatic shoes and a wrist strap are mandatory at every station and are supplied by the employer.