MIG/MAG Welder

You weld steel profile and plate in MIG/MAG on jigs, following the drawing and the weld symbol given for each joint. The day opens with a check of the wire, the gas flow and the earth clamp, then tacking the assembly, running the fill passes and grinding the seam where it will be painted. You measure the frame with a tape and a square before it leaves the jig, stamp your own work and report porosity to the welding foreman. Two shifts run 07:00-15:00 and 15:00-23:00 with a weekly rotation, and Saturday is voluntary and paid on top.

Trade school in welding or metalwork, or equal practice

At least two years in MIG/MAG on steel above 3 mm

Reading a fabrication drawing and weld symbols

Steady with an angle grinder, a square and a tape

Willing to rotate two shifts weekly

Basic English for machine menus and safety labels

Willing to sit the shop welding test in the first month

Net salary from 855 up to 940 EUR per month

Permanent contract with full insurance from day one

Paid supplement on the afternoon shift

Meal tickets for every worked day

Company transport from the Berceni and Giurgiului terminals

Paid welding practice on the shop test plates

Work clothing, leather gloves, mask and safety shoes provided

Welders who pass the fillet and butt test move to the structural team and to certified work within a year. The shop pays the EN ISO 9606 examination at a testing house in Bucharest.

A covered hall with a fume extraction arm at every booth, welding screens between the bays and a separate grinding corner. Mask, leather apron, gloves and safety shoes are mandatory and are supplied by the employer.