MIG/MAG Welder

You weld steel profiles and plate in CO2 and argon on jigs, following the drawing and the weld symbol given for each joint. The day starts with a check of the wire, the gas flow and the earth clamp, then tacking, the fill passes and grinding the seam where it will be painted. You measure the frame with a tape and a square before it leaves the jig, stamp your own work and report porosity to the welding foreman. Two shifts run 06:00 to 14:00 and 14:00 to 22:00 with a weekly rotation.

Trade school in welding or metalwork, or equal practice

At least two years of MIG/MAG on steel above 3 mm

Reads a fabrication drawing and weld symbols

Steady with an angle grinder, a square and a tape

Willing to rotate two shifts weekly

Basic English for machine menus and safety labels

A valid welding certificate is an advantage, the exam is paid

Net salary from 1090 up to 1199 EUR per month

Permanent contract with insurance from the first day

Food vouchers of 100 EUR per month

Paid supplement for the afternoon shift

Additional health insurance after the trial period

Paid welding practice on the shop's own test plates

Work clothing, leather gloves, mask and safety shoes provided

Welders who pass the shop's fillet and butt test move to the structural team and to certified work within a year. The workshop pays for the EN ISO 9606 examination at a testing house in Sofia.

A covered hall with a fume extraction arm at every booth, welding screens between the bays and a separate grinding corner. Mask, leather apron, gloves and safety shoes are mandatory and are supplied by the employer.