MIG/MAG Welder

You weld steel profiles and plate on jigs, following the drawing and the weld symbol for each joint. The shift starts with a check of the wire feed, the gas flow and the earth clamp, then tacking, the fill passes and grinding the seam where it will be painted. You measure the frame with a tape and a square before it leaves the jig, mark your own work and report porosity or undercut to the welding foreman rather than grinding it away. Two shifts run 06:00-14:00 and 14:00-22:00 with a weekly rotation, and Saturday work is voluntary and paid separately.

Trade school in welding or metalwork, or equal practice

At least two years in MIG or MAG on steel above 3 mm

Reading a fabrication drawing and weld symbols

Steady with an angle grinder, a square and a tape

Willing to rotate two shifts every week

Basic English for machine menus and safety labels

Net salary from 920 up to 1035 EUR per month

Permanent contract with social and health insurance from day one

Paid supplement on the afternoon shift

Hot meal in the canteen on every shift

Company transport from Niksic and the nearby villages

Welder qualification test paid by the employer

Mask, leather apron, gloves and safety shoes provided

Welders who pass the fillet and butt test move to the structural team and to certified work within a year. The shop pays for the EN ISO 9606 examination at a testing house in Podgorica.

A covered hall with a fume extraction arm at every booth, welding screens between the bays and a separate grinding corner. Mask, leather apron, gloves and safety shoes are mandatory and supplied by the employer.