CNC Machine Operator

You load the blank, start the proven program and run the cycle, then measure the first part with a caliper and a micrometer against the drawing. Tool wear is corrected in the offset table, and a worn insert is changed and logged. Between batches you clean the chips from the bed, check the coolant level and concentration, and confirm the fixture is seated before the next run. Anything outside tolerance goes to the setter with the measurement sheet, never back into the batch. Two shifts run 06:00-14:00 and 14:00-22:00 with a weekly rotation.

Trade school in machining or metalwork, or equal practice

At least two years on a CNC lathe or milling machine

Reading a technical drawing and a tolerance field

Confident with a caliper, a micrometer and a bore gauge

Tool offset correction on a Fanuc or Siemens control

Basic English for the control menus and the tool catalogue

Net salary from 880 up to 990 EUR per month

Permanent contract with social and health insurance from day one

Paid supplement on the afternoon shift

Hot meal during the shift

Company transport from Niksic and the surrounding villages

Paid training on the control for operators new to the machine

Work clothing, gloves, eye protection and safety shoes provided

Operators who measure cleanly and hold tolerance move to setting and simple program editing within a year, which is the step to machine setter in this workshop.

A machine hall with enclosed cells, chip conveyors and a separate measuring corner with a granite plate. Eye protection, gloves and safety shoes are mandatory, and the coolant mist is extracted at each machine.